2
2-46
Setting up the Fiery X2
Print Measurement Page
Yes/No [Yes]
Choose this option to print a page of known color data for measurement. You are noti-
fied that the copier is printing a measurement page without calibration.
The Fiery X2 prints a page of graduated colors that you place on the copier glass.
Measure Page
Yes/No [Yes]
Select
Yes
to measure the colors on the measurement page.
Position the Kodak Gray Scale strip (included in your Fiery X2 media pack) and the
measurement page on the copier. The copier scans the page and creates an internal
measurements file.
If you select
No
, measurement is skipped and the
Print Comparison Page
option is dis-
played.
Print Comparison Page
Yes/No [Yes]
Specify
Yes
if you want the Fiery X2 to print a page with two versions of a set of test
images, one version using a calibration based on your most recent measurements and
the selected target, and one with no calibration.
Apply/Overwrite Calibration?
Yes/No [Yes]
Choose
Yes
if you are satisfied with the calibration shown in the comparison page. The
newest calibration overwrites any previous one.
Choose
No
to return to the main Calibration Setup menu.
This affects all users. Continue?
Yes/No [Yes]
This is a reminder that calibration is a global setting; if you overwrite calibration, every
print job is affected by the new calibration.
If you choose
Yes
, calibration is overwritten and you return to the main Calibration
menu. If you are finished, choose
Exit Calibration
. The Fiery X2 reboots.
If you choose
No
, calibration is not overwritten, and you return to the main Calibra-
tion menu.