2
2-38
Setting up the Fiery X2
PostScript Setup options
PS (PostScript) Setup options allow you to set defaults for both the Fiery X2 and the
copier. Most of these defaults can be overridden on a job-by-job basis. See the User
Guide for more information.
T
O
ACCESS
P
OST
S
CRIPT
S
ETUP
OPTIONS
:
1.
In the main Setup menu, choose PS Setup.
2.
Enter the options appropriate to the printing requirements at the site.
3.
When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
Color Mode
CMYK/Grayscale [CMYK]
Specify whether you will be printing color (
CMYK
) or
Grayscale
images to the Fiery X2
by default.
CMYK
gives you full color prints. Select
CMYK
as the Color Mode before per-
forming calibration on the Fiery X2.
Grayscale
converts all colors into shades of gray.
Compression
On/Off [On]
Select
On
to enable compression, so that jobs are printed at high quality but with
greatly reduced memory requirements. Select
Off
to disable this feature.
Page Order
Forward/Reverse [
Forward
]
Forward
prints pages in the order received, so that the output is stacked from last page
to first.
Reverse
prints jobs in reverse order, so that the output is stacked from first page
to last. Reverse order requires compression, so this option only appears if Compression
is set to On. If Compression if Off, output will be stacked in forward order.
Default Paper Sizes
US/Metric [US]
Specify whether to print on
US
paper sizes (for example, letter, legal, tabloid), or
Metric
paper sizes (for example, A4, A3) by default. When no page size is defined within a
PostScript file, jobs are printed on Letter paper if you selected US, or A4 paper if you
selected Metric.
