2
2-29
Network Setup options
N
OTE
:
If you change your mind about any of the menus you have selected, you can use
the Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes you must exit Network Setup and select No to Save Changes.
.
Once you have chosen a file server, the Fiery X2 immediately tries to log in as a guest
without a password. If it succeeds, it skips to the
NetWare Print Server
option.
If you try to add a file server but all Fiery X2 connections are already being used, you
are prompted to remove a file server (see “Remove File Server” on page 2-32).
Network Setup
Service Setup
PServer Setup
Bindery Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name [From List]
You may select the file server from a scrollable list, or by a name search.
Choose
From List
if your network doesn’t have a large number of file servers.
Select
Search by Name
if the number of file servers is so large that scrolling through
the list would take a long time.
If you selected
From List
:
If you selected
Search by Name
:
Add Server
[list of all servers]
The Fiery X2 obtains a list of NetWare
file servers by querying the IPX network.
Use the up and down buttons to select a
NetWare file server from the list. Choose
the server on which you have configured
a print server and print queue to handle
Fiery X2 print jobs.
Enter First Letters of Server Name
Use the up and down buttons to enter the
first letters of the name of the file server
you want to use, and choose OK.
Add Server
[list of servers matching the search]
This option is displayed if you entered
letters to search. Scroll to select the server
you want from the list.