3
3-9
Overview of IPX printing to the Fiery SI
T
O
ACTIVATE
THE
BINDERY
CONTEXT
:
1.
If you cannot reboot the NetWare server at this point, type the
set
command manually
at the server’s colon prompt.
Use the same command as you entered in the
AUTOEXEC.NCF
file (in step 7 of the previ-
ous procedure).
2.
If you can reboot the NetWare server, the
set
command is loaded automatically.
You are ready to set up the Fiery SI print server and print queue. See the next section
for details.
Setting up a Fiery SI print queue
For both NetWare 3.1x and 4.x versions, the NetWare print server and print queue for
Fiery SI are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in NetWare’s PUBLIC directory.
T
O
SET
UP
A
N
ET
W
ARE
SERVER
FOR
PRINTING
TO
THE
F
IERY
SI:
1.
Log in to the NetWare server as the Supervisor.
2.
At the NetWare MS-DOS prompt, type
pconsole
.
N
OTE
:
If you are using NetWare 4.x, PCONSOLE has two modes. Press the F4 key to
switch to Bindery mode. If you are using NetWare 4.x, choose Bindery mode for
PCONSOLE.
The Available Options menu is displayed.
3.
Choose Change Current File Server and press Enter.