2
2-22
Setting up the Fiery SI
•
Hold queue
—The Hold queue can be used for storing jobs that will be printed at a
later time, and jobs that will be printed repeatedly. The Hold queue requires some
administration. In order to print a job in the Hold queue, the job has to be moved or
copied from the Hold queue to the Print queue. Printing and deleting jobs from the
Hold queue requires the Fiery XJ Spooler.
•
Printed queue
—The Printed queue is a job storage area on the Fiery SI disk; it con-
tains the most recent jobs printed from the Print queue. The Printed queue makes it
convenient to reprint those jobs. A Server Setup option enables this queue and gov-
erns the maximum number of jobs retained in it at any given time (see page 2-9).
Reprinting jobs in this queue requires the Fiery XJ Spooler
.
