2
2-7
Fiery SI Setup
N
OTE
:
If you make a mistake during setup, you can always use the Menu button to
cancel without saving changes. If you are viewing a setup screen, pressing the Menu
button cancels what you are doing in the current screen to bring you to the next higher
level menu. You can start the current setup again, or exit without making changes.
When you have entered all the settings or made all the changes you want, you need to
save the changes. For most setups, a screen prompts you to save changes. When you
finish Network Setup for all the protocols you use, choose
Exit Network Setup
; you are
prompted to save changes. If you choose
Yes
, your settings overwrite previous settings.
If you choose
No
, your previous settings are retained. The Fiery SI reboots after you
exit from the Setup menu.
