1
1-41
Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003
T
O
CONFIGURE
INSTALLABLE
OPTIONS
ON
THE
F
IERY
X3
E
FROM
THE
PCL
PRINTER
DRIVER
1.
On Windows 2000, click Start, choose Settings, and then choose Printers.
On Windows XP, click Start, and choose Printers and Faxes.
On Windows Server 2003, click Start, choose Control Panel, and then choose Printers
and Faxes.
2.
Right-click the Fiery X3e icon, and choose Printing Preferences.
3.
Click the Configuration tab and specify the options installed on the Fiery X3e.
4.
Select an installed option from the Available Options list, and click Add to move
the option to the Installed Options list.
Engine Configuration
—Copier, Printer
Optional Trays
—Not Installed, Universal Cassette (Tray 3), Universal Cassettes
(Tray 3, 4), LCC (Tray 3)
Duplex Option
—Not Installed, Installed
Finisher Option
—Not Installed, Single Staple Finisher, Folding Finisher
Engine Storage Option
—Not Installed, Extension Memory, Hard Disk Drive,
Extension Memory and Hard Disk Drive
5.
Click Apply, then click OK.
You are ready to connect to your network type (see the next section
Windows 2000/XP/Server 2003 printer connection”
).
