Fiery KM-C3130 User Software Installation Manual Download

Page: 47 / 136

1-31

Setting up PostScript or PCL printing with Windows NT 4.0

Completing the Windows NT 4.0 IPX (Novell) connection

Complete the setup for the IPX (Novell) connection as follows:

• Configure the Novell network and file server for handling Fiery X3e print jobs. The

file server should be configured with a print server and print connection for the
Fiery X3e. For details, see your NetWare documentation.

• Prepare the Fiery X3e for IPX printing.

• Set up the IPX connection on the computer.

NetWare protocols (NWLink IPX/SPX Compatible Transport) and NetWare client
services should already be installed on the Windows NT 4.0 computer.

SET

IPX (N

OVELL

)

PRINTING

FOR

INDOWS

NT 4.0

Double-click Network Neighborhood.

Double-click NetWare or Compatible Network.

A list of NetWare servers appears.

Double-click the NetWare Tree or File Server on which the network administrator
defined a print connection for the Fiery X3e.

You may have to log in to the file server to see the print connections.

Double-click the print connection defined for the Fiery X3e.

Summary of Contents for KM-C3130









































































































































Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands

Fiery KM-C3130, User Software Installation Manual

Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands