Fiery KM-C3130 User Software Installation Manual Download

Page: 124 / 136

3-2

Downloading Installers with Fiery WebTools

Using the Fiery WebTools Installer

The Installer WebTool allows you to download installers for printer drivers directly
from the Fiery X3e to your computer.

DOWNLOAD

PRINTER

DRIVER

FILES

WITH

THE

NSTALLER

OOL

Start your Internet or intranet browser and enter the DNS name or IP address of
the Fiery X3e.

Click the WebTools button.

Select a login level, enter a password if required, and click OK.

No password is required to log in as Guest. If the Administrator has configured Guest
access, any user has full access to the Installer WebTool while logged in as Guest.

Click Installer.

Under the name of your operating system, click the name of the item you want
to install.

Summary of Contents for KM-C3130









































































































































Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands

Fiery KM-C3130, User Software Installation Manual

Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands