Fiery KM-C3130, User Software Installation Manual

Page: 123 / 136

3
3-1 Setting up Fiery WebTools
Fiery WebTools allow you to manage your Fiery X3e remotely from the Internet or
from your company’s intranet. The Fiery X3e has its own home page, from which you
can select a variety of functions.
For more information on using Fiery WebTools, see the Printing Guide .
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you must set specific
Fiery X3e options in Network Setup and Printer Setup. You also must prepare each
user’s computer to communicate with the Fiery X3e over the Internet or intranet.
For more information about Network Setup and Printer Setup, see the
Configuration Guide .
T
O SET UP CLIENT WORKSTATIONS TO USE
F
IERY
W
EB
T
OOLS
1. Enable TCP/IP networking.
2. Make sure the workstation has a valid, unique IP address.
3. Make sure a supported Internet browser is installed on the computer.
For more information on supported browsers, see the Quick Start Guide .
4. Make sure Java is enabled in your Internet browser.
For more information on setting up the Fiery X3e and the network, see the
Configuration Guide .
Chapter 3:
Downloading
Installers with
Fiery WebTools