Fiery Fiery EX2101 Page 31 Job Management Manual Download

Page: 31 / 214

2-5

The graphical interface

In the Active Jobs window, you can:

• Monitor and manage jobs on the Fiery EX2101 (see

page 3-6

)

• Customize job ticket information (see

page 3-8

)

• Monitor jobs on multiple Fiery EX2101 servers* (see

page 2-12

)

Jobs window

The Jobs window displays information about jobs that have printed successfully
through a connected Fiery EX2101. The window is divided into four layered panels.
Click the selection tabs at the bottom of the window to move between different panels.

The following illustration shows the Jobs window for Command WorkStation, which
is nearly identical to the Jobs window for Command WorkStation LE.

In each panel, the title bar displays the name of the panel and the total number of
jobs displayed.

All panels of the Jobs window allow you to customize the job ticket information
(see

page 3-8

Printed Jobs tab

Summary of Contents for Fiery EX2101























































































































































































































Search results

Summary of Contents for Fiery EX2101

Reviews:

Related manuals for Fiery EX2101

Brands by name

Popular brands

Fiery Fiery EX2101, Job Management Manual

Search results

Summary of Contents for Fiery EX2101

Reviews:

Related manuals for Fiery EX2101

Brands by name

Popular brands