manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual, Page: 169 / 214

Share
Download
Fiery Fiery EX2101 Job Management Manual Download Page 169

8

8-1

Introduction to FieryBar

With the Fiery Advanced Controller Interface (FACI) installed, you can use FieryBar 
to view Fiery EX2101 status information, start software, set up and restart the 
Fiery EX2101, delete stored jobs, cancel active jobs, and log off from Windows. While 
most elements in FieryBar have counterparts in Command WorkStation, you can view 
current functions on FieryBar when Command WorkStation is not running.

N

OTE

:

FieryBar is available as part of the Fiery Advanced Controller Interface, which is 

an optional upgrade. For more information, contact your authorized service/support 
technician.

Introduction to FieryBar

FieryBar, located at the top of the monitor screen, includes the following:

Status

FieryBar displays the following status information for the Fiery EX2101:

RIPping area

Name of the job currently processing

RIP status area

Amount of the job that has processed

Printing area

Name of the job currently printing

Message area

Error messages and other Fiery EX2101 information

Chapter 8:
Using FieryBar

Click to expand or collapse FieryBar

RIPping area

Printing area

Activity light

Message area

RIP status area

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments