manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual, Page: 149 / 214

Share
Download
Fiery Fiery EX2101 Job Management Manual Download Page 149

7

7-3

Tracking and managing jobs with Fiery WebSpooler

The Fiery WebSpooler window appears in a new browser window.

About the Fiery WebSpooler window

Similar to Command WorkStation, Fiery WebSpooler allows you to view 
Fiery EX2101 and copier functions, and acts as an interface from which you can 
control those functions.

The Fiery WebSpooler window is divided into three areas by Spool, RIP, and Print 
status bars. When the Fiery EX2101 receives print jobs, the Fiery WebSpooler window 
becomes a dynamic display, filled with the names of jobs and their characteristics.

The Spool, RIP, and Print areas of the Fiery WebSpooler window represent the stages 
of printing a job. Jobs come in at the top level (Spool) and drop down to the Print 
level, unless they are held along the way.

The job icons displayed in the Fiery WebSpooler window are explained on 

page 7-8

.

The RAM status bar indicates the amount of memory in use. The Drive status bar 
indicates the amount of hard disk drive space in use.

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments