manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual, Page: 124 / 214

Share
Download
Fiery Fiery EX2101 Job Management Manual Download Page 124

6

6-6

Advanced Features of DocBuilder Pro

Layout settings

A layout is a plan that specifies the number, ordering, and rotation of page images on 
the sheet. DocBuilder Pro supports layouts of up to 25 pages per sheet, in a matrix of 
up to 5 rows by 5 columns (50 pages duplex). All combinations of rows and columns 
allow gang printing; however, only Gang Up layouts in the 5

x

5 matrix support 

imposition.

N

OTE

:

If the number of pages in your job does not divide evenly into the number of 

rows and columns in the layout you select, you may see some sheets with blank spaces. 
The layout you select should correspond to the number of pages in your job.

Rows

Click the Rows up and down arrows to specify the number of rows (up to five) in a 
layout, or specify the number of rows in the layout by typing a value in the Rows field. 
Changes to the Rows value are reflected immediately in the main window, whether you 
are in Layout or Preview mode.

The Rows value interacts with the Columns and Scale settings. When you choose a 
value that causes content to extend beyond the edge of the sheet, DocBuilder Pro 
provides a visual warning. For more information, see 

“Clipping indicators”

 on 

page 6-12. 

When you change the Rows value, you are prompted with a message that all custom 
page edits (Add, Delete, or Duplicate) applied to the job are canceled.

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments