manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual, Page: 112 / 214

Share
Download
Fiery Fiery EX2101 Job Management Manual Download Page 112

5

5-6

Using DocBuilder Pro

Navigating in the Imposition window

Use the icons and menus at the top and bottom of the Imposition window to perform 
the following:

• Switch from Preview mode (thumbnails of actual content) to Layout mode (page 

numbers only).

• Switch between Mixed Page mode (document with varying page sizes) and Fixed 

Page mode (document with a single page size). For more information on Mixed Page 
and Fixed Page modes, see 

page 6-1

.

• Zoom in and out.

• Drag the job preview around to make a particular page or sheet surface visible.

• Go directly to a particular page or sheet surface.

The Zoom tool, Pan tool, Preview mode, Layout mode, Mixed Page mode, and Fixed 
Page mode buttons are located in the upper-right corner of the window.

Preview mode

Layout mode

Zoom tool

Pan tool

Mixed Page mode

Fixed Page mode

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments