Fiery E-8100, Installation And Service Manual

Page: 38 / 158

U
SING THE
E-8100 38
Network Status LEDs
Two LEDs next to the Ethernet connector indicate the network speed. When data transfer
occurs between the E-8100 and the network, the appropriate LED(s) blink to indicate
network activity. For additional network information, see
Configuration and Setup on the
User Documentation CD.
N
OTE
: The network cable at the customer site is a straight-through Ethernet cable that
connects to the lower RJ-45 port on the E-8100 back panel. The copier interface cable
included with the E-8100 is a 16.4 ft. Ethernet crossover cable that connects to the upper
RJ-45 port on the E-8100 back panel. The cables look similar but are not interchangeable.
Make sure that you connect the cables to the correct ports (see
Figure 5 on page 28 and
Figure 6 on page 29 ).
Network link speed LED 1 LED 2
10 Megabits/second Off Green
100 Megabits/second Green Green
1000 Megabits/second Amber Green
LED 2
LED 1
Ethernet network port
(Lower RJ-45)