manualshive.com logo in svg

Fiery E-8100, Installation And Service Manual, Page: 113 / 158

Share
Download
Fiery E-8100 Installation And Service Manual Download Page 113

S

YSTEM

 

AND

 U

SER

 

SOFTWARE

113

Check for Product Updates (Software Downloads Site)

The Check for Product Updates URL (also known as the Software Downloads Site) allows 
you to access the Update Server to view and manually download all available updates for 
E-8100 System and User Software. You can access Check for Product Updates by copying and 
pasting a unique URL into a web browser from a client computer. (For details, see 

page 114

.)

N

OTE

: 

The list that displays when you access Check for Product Updates may include: 

• Updates that are unavailable through System Updates and/or are not approved for all 

users.

• Updates that may already be installed on some E-8100 print servers. To help you choose 

the updates to download, compare the list displayed with the E-8100 print server’s 
Configuration Page > Updates log.

Check for Product Updates is especially useful if your E-8100 cannot access the Internet, is 
behind a firewall, or is otherwise unable or not configured to seek and accept automatic 
updates from the Update Server (for instance, if you do not want—or the E-8100 is unable—
to take advantage of the auto-download/auto-installation/auto-notification features available 
through System Updates). 

For a detailed procedure, see 

“To install updates using Check For Product Updates”

 on 

page 114.

Make sure to review 

“Before updating the E-8100”

 on page 106 before using Check for 

Product Updates.

Summary of Contents for E-8100































































































































































Reviews:

No comments