Fiery E-8100, Installation And Service Manual, Page: 108 / 158

S
YSTEM AND
U
SER SOFTWARE
108
T
O SCHEDULE
S
YSTEM
U
PDATES
1. Access System Update.
You can access System Updates directly from a FACI-equipped E-8100, a Remote Desktop
connection from a client computer (see
page 112 ), or a client computer using WebTools or
Command WorkStation.
If you access System Updates directly from a FACI-equipped E-8100 or through Remote
Desktop, an additional feature, Check Now, is available (see
page 111 ). Check Now lists the
updates that are currently available (Patches tab) and the updates that have already been
installed (History tab).
N
OTE
:
Check Now is not available when you access System Updates from Command
WorkStation or WebTools.
N
OTE
:
While updates are being installed, you cannot print to the E-8100. Schedule the
automatic updates when no one plans to print. The E-8100 may also need to reboot several
times during the update process.
From the E-8100
(requires FACI
or Remote Desktop)
From a Client using
Command Workstation
From a client using WebTools
• Click Start > All Programs >
Fiery > System Updates.
N
OTE
:
If the E-8100 is not equipped
with FACI, you can access System
Updates on the E-8100 from a client
computer using Remote Desktop
(see page 112 ).
• Start Command Workstation.
• Log on with Administrator
privileges.
• Choose Server > Setup.
• Choose Server > System
Update.
• Open your web browser, type
the IP address or DNS name
of the E-8100, and then press
Enter.
• Click the Configure tab, and
then click Launch Configure.
• Log on with Administrator
privileges.
• Choose Configure > Server >
System Update.
• Choose Server > System
Update.