Fiery E-750, Configuration Manual, Page: 74 / 184

4
4-18 Performing Setup from the Control Panel
Security Setup options
Use the IP Filtering and IP Port Setup options for Security Setup.
Using IP Filtering options, you can set controlled access to the E-750 by specifying IP
address(es) that the E-750 permits or rejects receiving. This prevents unlimited access
to the E-750 over your network and ensures network security in your environment.
Using IP Port Setup options, you can close unnecessary ports and help reject inbound
access from the network.
IP Filtering
By default, the E-750 permits all IP addresses. To control access, you can set an IP
address or a range of IP addresses.
Enable IP Filter
Yes/No [No]
Select Yes to allow the E-750 to enable IP filtering proceed to the subsequent IP
filtering settings.
Default Policy
Accept/Deny [Accept]
If you selected Yes to enable IP filtering, this option appears. Select Accept to enable
IP filtering.
Select Accept to accept IP addresses other than the IP addresses you specify at this
setup. Select Deny to reject IP addresses other than the IP addresses you specify at this
setup.
Network Setup
Protocol Setup
TCP/IP Setup
Security Setup