manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 59 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 59

4

4-3

E-750 Control Panel

E-750 Control Panel

Use the E-750 Control Panel (on the left side of the front of the copier/printer) 
supported at your site, either the copier or printer, to view status information, print 
special pages, and set up printing. While most elements in the Control Panel display 
have counterparts in Command WorkStation, you can view current functions on the 
Control Panel even when Command WorkStation is not connected to the server or is 
not running.

Safety warnings

The E-750 display window is a liquid crystal display (LCD) made of glass, and it can 
break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale, 
ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap 
and water immediately.

Do not touch or put pressure on the display window. This will change the color of 
the

 

window.

Summary of Contents for E-750

























































































































































































Reviews:

No comments