manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 27 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 27

2

2-3

E-750 on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003

Configuring a Windows NT 4.0/2000/Server 2003 server to 
communicate with the E-750

To configure a Windows NT 4.0/2000/Server 2003 server to communicate with the 
E-750, follow these general steps. More detail is provided in subsequent sections in this 
chapter and in your Microsoft documentation.

•

Load the TCP/IP network protocol on the server and configure it with an IP address, 
subnet mask, and gateway.

•

Enter the host name of the E-750 in the host database used by your system (see 

page 2-4

). 

•

Perform E-750 Setup.

•

On the Windows NT 4.0/2000/Server 2003 server, create a printer for each E-750 print 
connection, install the appropriate printer drivers, and (optionally) share the printer 
on the network (see 

page 2-5

).

•

Enter the host name and remote printer name of the E-750 in the printer connection. 
For more information, see 

page 2-18

.

•

If the Windows NT 4.0/2000/Server 2003 server is also a workstation, install Fiery 
utilities (see the 

User Software Installation Guide

).

Summary of Contents for E-750

























































































































































































Reviews:

No comments