manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 163 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 163

7

7-11

Shutting down, rebooting, and restarting the E-750

Shutting down, rebooting, and restarting the E-750

Generally, you can leave the E-750 and the copier running all the time. This section 
describes how to reboot, shut down, and restart the E-750 when

 

necessary.

Shutting down and rebooting the E-750

You may need to shut down the E-750 for service, or reboot the entire E-750 system. 
When you do so, fonts that have been downloaded to the hard disk are not deleted. 
Print jobs in the Hold queue, the Printed queue, and jobs that have been processed but 
not printed are not deleted; they will be available for printing when you restart the 
E-750.

T

O

 

SHUT

 

DOWN

 

THE

 E-750

1.

Make sure that no jobs are being processed or printed (the activity light should 
be off).

2.

Press the Menu button on the Control Panel to access the Functions menu.

3.

Use the Down arrow to scroll to Shut Down. Press the Set Button.

4.

Use the Down arrow to scroll to Shut Down System. Press the Set button.

5.

It is now safe to turn off the copier using the main power switch.

N

OTE

:

After turning off the copier, wait at least three seconds before turning it back

 

on.

Summary of Contents for E-750

























































































































































































Reviews:

No comments