Fiery E-750, Configuration Manual, Page: 109 / 184

4
4-53 PrintMe Setup options
PrintMe Setup options
PrintMe allows users to access and print their e-mail messages, Internet content, and
other documents anytime, anywhere, from any device, to the E-750.
N
OTE
:
Jobs sent with a PrintMe account are only sent through the E-750
Direct connection.
For more information about PrintMe, go to www.printme.com.
T
O ACCESS
P
RINT
ME
SETUP OPTIONS
1. In the main Setup menu, choose PrintMe Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
In the following list of options, default values, where applicable, appear in square
brackets.
Enable PrintMe
Yes/No [No]
To enable PrintMe, you must first set up DNS. For information on DNS Setup, see
page 4-17 . Select Yes to enable PrintMe, select Save, and exit Setup.
The E-750 restarts and acquires the 16-digit activation code required to proceed with
PrintMe Setup. Immediately after the E-750 restarts, a PrintMe activation page is
printed with the E-750 PrintMe activation code.
From any web enabled computer, go to www.printme.com and click Activate Stations.
Enter the 16-digit activation code that was printed on the PrintMe confirmation page.