I
NSTALLATION
25
Network
Make sure that the network will be available at the time set for installation.
Verify with the network administrator that the network is functioning before you attach
the E-41.
Make sure that the configuration requirements specified in
Configuration and Setup
(on the User Documentation CD) have been met for remote computers and the network.
Setting customer expectations
When the site is ready, installation of the E-41 takes about one hour. Inform the customer of
the following:
• Some nodes on the network may be unavailable for up to one hour.
• The copier/printer may be unavailable for up to one hour.
• The network administrator must be available during the installation for network
connectivity.
Equipment downtime and impact on the network can be minimized if the network
administrator installs a network connector for the E-41 and confirms network
functionality with the connector in place before the date scheduled for the E-41
installation.
• The network administrator must make a networked computer available during the
installation. The appropriate software must be installed in advance. Documentation for
the networked computer and network operating software should be available.
• The network administrator must install the user software shipped with the E-41 onto
networked Windows and Mac OS computers that print to the E-41 (user documentation
is also included).
N
OTE
:
This guide covers hardware installation and service and provides general information
about connecting the E-41 to the customer’s network. Network Setup and configuration
information exceeds the scope of this guide. For Network Setup and configuration
information, refer the network administrator to
Configuration and Setup
on the User
Documentation CD.
Summary of Contents for E-41
Page 156: ......
