4-3
4
Accessing Print Controller X4(AR-PE1) internal components
Accessing Print Controller X4(AR-PE1) internal
components
In order to access internal components, you must first shut down the
Print Controller X4(AR-PE1) and remove the side panel.
Always use the procedure below when opening the Print Controller X4(AR-PE1). If the
Print Controller X4(AR-PE1) is powered on, shut down the system.
Shutting down and restarting the Print Controller X4(AR-PE1)
The Print Controller X4(AR-PE1) will generally be left on all the time at the customer
site. Remember that when the Print Controller X4(AR-PE1) is powered off, network
access to the copier is interrupted.
You should power off the Print Controller X4(AR-PE1) when you need to service it or
the copier, and before you remove or attach any cables to it. Power off the
Print Controller X4(AR-PE1) when changing the copier’s toner in order to prevent the
fan from drawing toner into the Print Controller X4(AR-PE1).
T
O
SHUT
DOWN
THE
P
RINT
C
ONTROLLER
X4(AR-PE1)
1.
Make sure that the Print Controller X4(AR-PE1) Info screen reads Idle.
When
Printing
or
Ripping
appears on the Control Panel the
Print Controller X4(AR-PE1) is currently processing.
Idle
appears in the Info screen
when the Print Controller X4(AR-PE1) is finished processing the job.
2.
At the Idle screen, press the menu button once to display the Functions menu.
3.
Select Shut Down from the Functions menu.
4.
At the next screen, select Shut Down System.
The message
It is now safe to power off the system....
is displayed.
5.
Power off the Print Controller X4(AR-PE1) using the power switch on the back panel
(press 0).
Print Pages
Suspend Printing
Resume Printing
Shut Down
Functions
Clear Server
Run Setup
Run Diagnostics
Calibration
Functions
Use the line selection
button to the right to
select Shut Down.
