3-15
3
Shutting down and restarting
Shutting down and restarting
The Print Controller X4(AR-PE1) will generally be left on all the time at the customer
site. Remember that when the Print Controller X4(AR-PE1) is powered off, network
access to the copier is interrupted.
You should power off the Print Controller X4(AR-PE1) when you need to service it or
the copier, and before you remove or attach any cables to the
Print Controller X4(AR-PE1). Also power off when changing the copier’s toner to
prevent drawing toner into the Print Controller X4(AR-PE1).
T
O
SHUT
DOWN
THE
P
RINT
C
ONTROLLER
X4(AR-PE1)
1.
Make sure that the Print Controller X4(AR-PE1) Info screen reads Idle.
When
Printing
or
Ripping
appears on the Control Panel the
Print Controller X4(AR-PE1) is currently processing.
Idle
appears in the Info screen
when the Print Controller X4(AR-PE1) is finished processing the job.
2.
At the Idle screen, press the menu button once to display the Functions menu.
3.
Select Shut Down from the Functions menu. At the next screen, select Shut Down System.
The message
It is now safe to power off the system....
is displayed.
4.
Power off the Print Controller X4(AR-PE1) using the power switch on the back panel.
T
O
RESTART
THE
P
RINT
C
ONTROLLER
X4(AR-PE1)
1.
If the Print Controller X4(AR-PE1) is already on, ensure that it is not receiving,
processing, or printing a document.
When
Printing
or
Ripping
appears on the Print Controller X4(AR-PE1) Control Panel,
the Print Controller X4(AR-PE1) is currently processing a print job. Wait until the job is
complete and
Idle
appears in the Info screen.
2.
Press the menu button once, then select Shut Down from the Functions menu and select
Reboot System.
Print Pages
Suspend Printing
Resume Printing
Shut Down
Functions
Use the line selection
button to the right to
select Shut Down.
