3-5
3
Installing additional options
5.
Press the line selection button to the right of Print Pages and then select Test Page.
The Print Controller X4(AR-PE1) sends the Test Page to the copier and displays the RIP
and Print status screens so you can monitor the job.
6.
Examine the quality of the Test Page from the copier.
The Test Page confirms that the Print Controller X4(AR-PE1) print engine is functional
and that the connection between the Print Controller X4(AR-PE1) and the copier is
good.
Installing additional options
If the customer has purchased additional Print Controller X4(AR-PE1) options, install
those before connecting the Print Controller X4(AR-PE1) to the network. For
installation instructions, see the documentation included in each option kit.
N
OTE
:
After installing options, print the Test Page to verify that the system is operating
properly. Checking the installation at each stage makes it easier to pinpoint the cause of
problems should they occur.
