2-5
2
Unpacking the Print Controller X4(AR-PE1)
Unpacking the Print Controller X4(AR-PE1)
The Print Controller X4(AR-PE1) is assembled and shipped from the factory in a box
that includes all necessary cables and documentation, as shown in Figure 2-2 on
page 2-6.
T
O
UNPACK
THE
P
RINT
C
ONTROLLER
X4(AR-PE1)
1.
Open the Print Controller X4(AR-PE1) Color Server box and remove the packing material.
Save the original boxes and packing materials. If you need to transport the
Print Controller X4(AR-PE1) at a later date, the original box and packing material will
ensure safe shipment.
2.
Remove the contents from the top container. Inspect the contents for visible damage.
The top container should include the following items:
• Bag containing an AC power cable.
• Media package (includes a package of user documentation and software).
3.
Give the media package to the customer or the network administrator.
Let the customer or network administrator know that in order to take full advantage of
the Print Controller X4(AR-PE1), the user software must be installed on computers that
will print to the Print Controller X4(AR-PE1).
4.
Set aside the remaining components from the top container.
5.
Remove the top container and any packing materials.
Set aside the packing material and note the orientation of the
Print Controller X4(AR-PE1) inside the shipping container in case you need to repack it
later.
6.
Carefully lift the Print Controller X4(AR-PE1) out of the box.
If you notice shipping damage to any Print Controller X4(AR-PE1) component, be sure
to save the shipping container in case the carrier needs to see it. Call the carrier
immediately to report the damage and file a claim, then call your authorized
service/support center. Be ready to furnish the serial number, printed on the back of the
Print Controller X4(AR-PE1).
