manualshive.com logo in svg

Fiery 3850C, Color Manual

Share
Download
Fiery 3850C Color Manual Download Page 49

2

2-13

Advanced workflows

Color proofing examples

The following examples illustrate methods for simulating the output from another 
printing system, such as an offset press. Each of the proofing examples uses an ICC 
profile to describe the destination color space. While some examples use simulation 
profiles built into the Fiery 3850C, others use ColorWise Pro Tools (see Chapter 4) to 
download custom ICC output profiles to the Fiery 3850C for use as simulation 
profiles. 

Photoshop 5.x RGB-to-CMYK conversion using a custom ICC profile

This workflow is useful for prepress environments that have integrated ICC color 
management and have profiles for the presses they use. In this example, an image in 
Photoshop 5.x is converted from RGB to CMYK using the Photoshop ICC color 
conversion features in the CMYK Setup option. (For more information on CMYK 
Setup, see your Photoshop 5.x documentation.) Using the Simulation settings available 
in ColorWise, the CMYK image is printed to the Fiery 3850C, and the output is made 
to appear as if it were printed on an offset press.

This document could be created as follows:

• In Photoshop 5.x, set CMYK Model in CMYK Setup to ICC. 

• In the Profile menu, select an ICC profile for the desired offset press. Click OK. 

• Open an RGB image. From the Image pull-down menu select Mode>CMYK Color. 

• Save the image in any file format. 

• Print directly to the Fiery 3850C. 

• Use ColorWise Pro Tools to select a simulation profile or download a custom ICC 

profile to the Fiery 3850C for use as a CMYK Simulation Profile. 

Summary of Contents for 3850C









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands