manualshive.com logo in svg

Fiery 3850C, Color Manual

Share
Download
Fiery 3850C Color Manual Download Page 19

 

1

 

1-3

Managing color on the Fiery 3850C

 

Detailed explanations of how these and other settings affect your print jobs are 
provided in subsequent sections of this chapter.

 

CMYK Simulation Profile

 

SWOP-Coated/DIC/Euroscale/Simulation 
1–10/None 
(Default set at Setup or in 
ColorWise Pro Tools)

Adjusts CMYK color data to simulate an offset press standard or a custom 
color 

 

gamut

 

 defined at your site. Choosing None bypasses simulation (see 

page 1-6). 

 

N

OTE

:

 Some of the Simulation settings have slightly different names depending 

on the model of printer. 

Output Profile

Default output profile/Output 1–10 
(Default set at Setup or in 
ColorWise Pro Tools)

The Output Profile is applied to all data in the print job (see page 1-6). 
User-defined output profiles can be downloaded to the Fiery 3850C using 
ColorWise Pro Tools (see Chapter 4). 

Pure Black Text/Graphics

On/Off 
(Default set at Setup)

The On setting optimizes the quality of black text and line art output. 
(see page 1-7).

Black Overprint

On/Off (Default set at Setup)

The On setting overprints black text placed on colored backgrounds; it 
automatically activates the Pure Black Text/Graphics option (see page 1-8).

Spot Color Matching

On/Off 
(Default set at Setup or with 
ColorWise Pro Tools)

The On setting enables Fiery 3850C matching of PANTONE colors; Off 
instructs the Fiery 3850C to match color output to a PANTONE-specified 
CMYK combination (see page 1-9). 

Fiery 3850C color print option

What it does

Summary of Contents for 3850C









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands