background image

7

7-11

Photoshop 5.x

Defining colors

You can choose colors in Photoshop with various color models, including HSB, CIE 
Lab, RGB, and CMYK. You can also choose named colors from the PANTONE 
Coated color library. For best results, use the color definition methods described in 
Chapter 5.

Saving files for importing into other documents

Before saving a file, perform any rotating, cropping, and resizing needed. This speeds 
processing when printing from the application in which the image is placed.

We recommend you use EPS or TIFF file formats to save RGB images that will be 
imported into other documents and printed to the Fiery 3850C. You can import EPS 
and TIFF files into virtually all page layout applications.

N

OTE

:

Although TIFF files display better when imported into other applications, their 

color and resolution characteristics may be altered by the application into which they 
are imported. EPS files are unaffected.

Choose Photoshop EPS or TIFF

Summary of Contents for 3850C









































































































































































































Reviews: