34
10. Animal Weighing Mode
24
10.1 Description of Animal Weighing Mode
Animal weighing mode is used to weigh live animals.
10.2 Basic Animal Weighing Settings
a.
Refer to
6.6
on how to select the desired weight unit.
b.
Enter Animal Weighing mode.
c.
Press and hold
[FUNC/SET]
to select filter. Then press
[FUNC/SET]
to shift between one of the below
5 parameters, then press
[PRINT/M+]
to confirm.
o
FLt 1 = Fast (Weight value is based on least number sampling data, accuracy will be lowest).
o
…..
o
FLt 3 = Normal (Displayed average weight is calculated based on the last 8 internal
readings).
o
…..
o
FLt 5 = Slow (Weight value is based on the most number of sampling data, accuracy will
be highest).
d.
Instrument displays weight release variation value.
e.
Press
[FUNC/SET] or [MR/UNIT]
key to select the preferred weight release variation
value.
10
parameters are available from Off to 20): -
o
rE oFF = auto release disabled.
o
rE 2 = auto release when weight varies ≥2% of rate capacity or W1 for dual weighing
range/interval mode).
o
……….
o
rE 20 = auto release when weight varies ≥20% of rate capacity (or W1 for dual weighing
range/interval mode).
f.
Press
[PRINT/M+]
to save.
g.
Instrument is now ready for animal weighing application.
10.3 Start using Animal Weighing
a.
Get an animal on platform.
b.
This instrument will calculate the weight of an animal. The result obtained will be flashing.
c.
In case more animals have to be weight in the same transaction, then get other animals on platform.
An updated weight will be calculated and displayed
25
as above step
b
.
d.
To update the weight reading manually, press
[CE/x10]
.
24
Animal Weighing function will not operate when weight is less than 20d (or 20d
1
for dual weighing range/interval).
25
Provide that extra weight added/removed fulfills the weight release variation value listed on point 5 of
11.2.
