40
11.5.4 Applying blank product code and product description
To apply blank customer code and customer description: -
1.
During normal operation status, long press numeric number key
0
.
2.
Press
[PF/Set] or [MR]
until P
Code
appears on LCD1 and press
[Print/M+]
.
3.
Instrument displays
PLU = 00
on LCD3.
4.
Press
[Print/M+]
to confirm.
5.
Instrument displays
Clear
on LCD3. At this point, product code and product description effect is
cancelled.
11.6 Customer Code and Customer Description
14
11.6.1 Create & save customer code and customer description to quick PLU
Procedures: -
1.
Go to F19 and press
[Print/M+]
.
2.
Press
[PF/Set] or [MR]
until
C Code
appears on LCD2 and press
[Print/M+]
to confirm.
3.
Instrument displays H code followed by the 1
st
6 digits. Enter the first 6 digits of the code here
and press
[Print/M+]
to confirm.
4.
Instrument displays M code followed by the 2
nd
6 digits. Enter the 7
th
~ 12
th
digits of the code
here and press
[Print/M+]
to confirm.
5.
Instrument displays L code followed by the 3
rd
6 digits. Enter the last 6 digits of the code here
and press
[Print/M+]
to confirm.
6.
Instrument displays first 6 digits of description content.
7.
Enter description starting from H, then M1, M2, M3 and finally L. Press
[Print/M+]
to confirm and end
editing after last digit has been input.
8.
Instrument displays
PLU = ?
on LCD3.
9.
Save customer code and customer description to a preferred quick PLU by entering the quick PLU
number (01~99) and press
[Print/M+]
.
10.
Instrument displayed
Done
on LCD3.
11.
At this point, customer code and customer description are saved and in effect.
11.6.2 Recall customer code and customer description from quick PLU
Procedures: -
1.
During normal operation status, long press any numeric number key (0 ~ 9).
2.
Press
[PF/Set]
or
[MR]
until
C Code
appears on LCD1 and press
[Print/M+]
.
3.
Instrument displays
PLU = 00
on LCD3.
4.
Enter the 2-digit PLU number then press
[Print/M+]
.
5.
Instrument displays
customer code on LCD3.
6.
At this point, selected customer code and customer description is recalled and in effect.
11.6.3 Clear customer code and customer description from quick PLU
To clear customer code and customer description quick PLU, follow paragraph
11.6.1
and press
[Clear/x10]
and press
[Print/M+]
in step 3.
14
If Customer Code is empty, customer description will be ignored.
