48
applied immediately.
If the code does not exist in this database, then instrument will employ code scanned.
Notes: -
a.
The above searching assumes all customer codes and product codes are unique in the same
database.
b.
If duplicate customer/product code is the case, instrument will employ the first customer/product found
in the database.
c.
Auto Database Search serves only the customer/product codes inputted by a barcode scanner.
Customer/product code inputted via instrument or external keyboard will not trigger the auto search
action.
d.
Production Settings PLU
operation in use will be terminated when instrument restarts.
21. Production Settings PLU
This instrument support 100 Production Settings PLU for each of the below weight units: -
kilogram (kg)
gram (g)
pound (lb)
Each Production Settings PLU contains 15 operation parameters. Refer to
Appendix T.2
for detailed
information about these operation parameters.
21.1 Create & Save Production Settings PLU
Production Settings PLU can be only created and saved to instrument by computer commands and by either
of the below methods: -
a.
Individual PLU creation and saving: - by computer command. Refer to
Appendix T
for more
information.
b.
Bulk creation and saving: - by computer using the Production Settings PLU generator file. This
generator file and the user guide are available for download at
measurement.com/resource/driversnsoftwares.
21.2 Recall a Production Settings PLU
Use either one of the below methods to recall a Production Settings PLU. The Production Settings PLU
employed before powering off will be employed again when powered on.
21.2.1 Keyboard method
27
1.
At Weighing mode, select the desired weight unit.
2.
Press and hold
[PLU]
.
3.
Instrument displays Recall, then the PLU entry page.
4.
Input the preferred Production Settings PLU number, then press
[Print/M+]
.
5.
The selected Production Settings PLU is now recalled, and the
Production Settings PLU Indicator
appears.
6.
To shift to another Production Settings PLU, repeat above steps 1 ~ 4.
Note
: When a blank Production Settings PLU is recalled, Err 46 appears.
27
Changing weight unit or working mode will cancel the current Production Settings PLU in use.
