FIBRO 2480.00.91.42 Operating Instructions Manual Download

Page: 66 / 76

66/76

Operating instructions WPM Gateway IoT

Maintenance

10.2

Data holder – Updating firmware

A data holder firmware update can be performed by a user with the authorisation level
Professional or Administrator.
View information about the installed firmware on the data holder and update the firmware.
Open view:

Main menu => Data holder =>

=> Firmware

Fig. 10-2 Data holder – Updating firmware

1) Drag and drop the firmware file to the firmware upload area to updating.

–

Alternatively, clicking in this area opens a file selection dialogue.

–

Firmware update starts automatically.

Fields

Name

Meaning

Article
number

Article number of the data holder.

Order
number

Order number of the data holder.

Revision

Version of the firmware.

Summary of Contents for 2480.00.91.42













































































Search results

Summary of Contents for 2480.00.91.42

Reviews:

Related manuals for 2480.00.91.42

Brands by name

Popular brands

FIBRO 2480.00.91.42, Operating Instructions Manual

Search results

Summary of Contents for 2480.00.91.42

Reviews:

Related manuals for 2480.00.91.42

Brands by name

Popular brands