48/76
Operating instructions WPM Gateway IoT
Set up WPM Gateway
8.2
Data holder – Assigning free sensors
In the
Sensors
view of a data holder, free sensors can be assigned to a data holder.
Open view:
Main menu => Data holder =>
=> Sensors
Fig. 8-2 Data holder – Assigning free sensors
By clicking the
button, the dialogue listing all free sensors with their current measured val-
ues is displayed.
Fig. 8-3 Data holder – Selecting a free sensor
By clicking on the
button, the sensor is assigned to the data holder.
After assigning a free sensor to a data holder, the sensor must be parametrised. A parametrisa-
tion dialogue is displayed.
For a description of the parameters, see Chapter 7.4.3.2 "Current parameters of a sensor" on
page 43.
