Operating instructions WPM Gateway IoT
39/76
Using the WPM Gateway
7.4.2.4
Data holder – Positioning of the sensors
Positioning of the sensors with the help of the tool screen
For a data holder, a tool screen can be uploaded for the top and bottom side, on which the indi-
vidual sensors can be positioned.
The view is divided into two sections: a list view with all sensors, and a view for managing the
tool screens and positioning the sensors.
Open view:
Main menu => Data holder =>
=>
Tool screen
Fig. 7-8 Positioning of the sensors with the help of the tool screen
Symbols
Symbol
Meaning
Entries for a sensor:
Name:
Name of the sensor.
Serial
number:
Serial number of the sensor.
Positioning of the sensor on the tool screen in terms of the top or bottom side.
In this case, the tool screen for the bottom side is selected.
Alarm status of the sensor.
Show or hide the Sensor toolbar.
The Sensor toolbar shows the current readings for temperature, pressure, bat-
tery charge voltage and reception strength, as well as the time stamp of the
last received signal.
Positioning of the sensor on the tool screen:
The selected sensor, this is automatically in the foreground.
top / above?
bottom / below?
