22/76
Operating instructions WPM Gateway IoT
Commissioning
Obtain an IP address
•
Use the Networking button to open the window.
•
For IPv4 and IPv6, specify the desired IP addresses or let the WPM Gateway obtain an IP
address from your network via DHCP.
Fig. 5-5 Obtain an IP address
After that, the WPM Gateway can be disconnected from the computer and connected to the in-
frastructure. Users should later be able to access the application's web interface on the network
via port 443. It must be ensured that the WPM Gateway is accessible for the users in the local
network.
