6/40
Operating instructions EtherCatWPM Gateway Fieldbus
Introduction
1.2
Foreseeable misuse
use, propermisusemisuse
The product must not be stressed beyond its load limits.
The following instances, among others, are considered misuse:
•
It is used for applications which the manufacturer has not explicitly approved. The state-
ments contained in the safety notes in the relevant documentation must be observed!
•
Construction changes that destroy the original state.
•
Improper system programming or configuration. The operator bears sole responsibility and
risks for using, programming and configuring the system.
•
Usage in explosive atmospheres.
•
Usage in explosive areas.
•
Usage in medical areas.
•
Usage in residential areas.
•
Usage in applications that are relevant to security.
•
Private use.
1.3
Scope of application
These instructions apply to the product with the description “EtherCatWPM Gateway” manufac-
tured by FIBRO GMBH DE 74855 Hassmersheim.
If you do not have the proper instructions for your product, contact
FIBRO GMBH DE 74855 Hassmersheim.
1.4
Disclaimer of liability
FIBRO GMBH guarantees the described function of the product as stated in advertising and
product information.
Further product properties are not confirmed. FIBRO GMBH assumes no liability for efficiency
and flawless functioning if the product is used for a purpose other than the one addressed in the
chapter “Proper use”. Compensation for damage is generally precluded.
If this product is used in environments for which it is not suitable or which do not fulfil the tech-
nical standards, FIBRO GMBH shall not be held responsible for the consequences.
FIBRO GMBH assumes no liability for damage to facilities and systems near the product caused
by a defect in the product or an error in these instructions.
FIBRO GMBH is not responsible for the violation of patents and/or the rights of third parties out-
side of the Federal Republic of Germany.
FIBRO GMBH is not responsible for damage caused by improper operation and failure to follow
the instructions provided in this document.
FIBRO GMBH is not liable for lost profit and subsequent damage resulting from failure to comply
with safety and warning notes.
The products from FIBRO GMBH are state of the art in science and technology.
FIBRO GMBH continually conducts studies of the products and the market in order to continu-
ally improve and further develop its products.
