14/38
Instructions manual Nitrogen Compact Booster
Safety
2.1.2
Personnel requirements
The following safety instructions must be observed in all operations on the machine. Disregard-
ing the safety instructions can lead to serious injuries or even death.
Personnel must have the necessary training and experience and possess the necessary tools
in order to be able to perform the work on the machine correctly. Improperly performed work can
be dangerous and cause serious or fatal injuries.
Do not perform any work if you have not read and understood the information in these instruc-
tions and in the applicable documentation.
If work equipment, operation, work methods or work techniques that have not been explicitly
proposed by FIBRO GMBH are used, the operator must himself ensure the safety for himself
and for other persons.
It must be ensured that the machine is also not damaged or does not become unsafe over the
course of the intended work.
All persons working on and with the machine must
•
have read and understood these instructions.
•
observe the safety information and guidelines in the operating instructions and the instruc-
tions contained therein.
•
observe the danger signs attached to the machine and the instructions on them.
•
observe the warning information about possible residual risks.
•
make sure that there are no unauthorised persons in the vicinity of the machine.
•
in addition to the operating instructions, observe also the operating instructions for occupa-
tional health and safety and accident prevention issued by the operator.
•
inform the operator or the supervisory personnel about any malfunctions.
•
inform the respective managers immediately about any changes to the machine which can
affect its safety.
2.2
Residual risks
WARNING!
High pressure
The machine is designed for an inlet pressure up to 200 bar.
Connection only to N
2
-nitrogen bottle up to 200 bar.
WARNING!
Unauthorised modifications
Any unauthorised modifications or any mounting of additional equipment not approved by
FIBRO GMBH compromise the operational safety.
Conversions or unauthorised modifications are prohibited.
The mounting of additional equipment must be discussed with FIBRO GMBH.
Unauthorised modifications endanger the safe operation and may lead to serious or
fatal injuries.
