Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM SU806 Series Hardware Guide
Page 47 of 86
TS_I2C_SCL
TS_I2C_SDA
TP_RST
TP_INT
SCL
SDA
VDD1V85
RESET
INT
VDD
NC
10
K
NC
VDD2V8
100nF
2.2uF
TP
Module
Figure 3-16 TP reference design
3.17
Camera
The camera interface is based on the MIPI_CSI standard and can support three (4-lane+2-lane+1-lane)
cameras, maximum 13MP. The pin definition of camera interface is shown in the following table:
Table 3-22 Camera interface pin definition
Pin Name
Pin
Number
I/O
4-Lane+2-Lane+1-Lane
Note
VDD1V8
125
PO DOVDD power supply, 1.8V
VDDCAMA
129
PO AVDD power supply, 2.8V
-
VDDCAMMOT
152
PO
Camera focus motor drive AFVDD power
supply, 2.8V
-
VDDCAMCORE
151
PO DVDD power supply, 1.2V
-
MIPI_CSI0_CLK_P
229
AI
MIPI rear camera serial interface clock+
-
MIPI_CSI0_CLK_N
230
AI
MIPI rear camera serial interface clock+
-
MIPI_CSI0_LN0_P
155
AI
MIPI rear camera serial interface lane 0+
-
MIPI_CSI0_LN0_N
231
AI
MIPI rear camera serial interface lane 0-
-
MIPI_CSI0_LN1_P
156
AI
MIPI rear camera serial interface lane 1+
-
