Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM NL668-EAU-MiniPCIe-10 Hardware User Manual
Page 13 of 56
Storage: -40°C
～
+85°C
Power consumption
Bottom current: <2mA
Sleep mode:
≤3mA (USB sleep)
Idle mode: <20mA (USB sleep); <29mA (USB wake up)
Physical
characteristics
Package: PCI express Mini Card interface 52Pin
Size: (5
0.8±0.15) mm×(29.85±0.15)mm
×
(3.4
±0.2)
mm
Weight: <9.5g
Interface
Antenna
Antenna: Main x 1, GNSS x 1, DIV x 1
Functional Interface
(U)SIM 3V/1.8V
USB 2.0 x 1
UART x 2, PCM, WAKEUP_IN/OUT, W_DISABLE#
System Indicator
Software
Protocol Stack
Embedded TCP/IP and UDP/IP protocol stack
AT Command
3GPP TS 27.007 and 27.005, and proprietary FIBOCOM AT
Firmware update
USB (UART does not support DOWNLOAD)
Voice service
SRLTE, VoLTE, HR, FR, EFR, AMR, DTMF, Caller ID, Call Transfer, Call Hold,
Call Waiting and Multi-Talk, etc.
SMS
point-to-point MO, MT; cell broadcast; support Text and PDU modes
MMS service
Need AP to realize MMS protocol
Table 2-1 Product Specifications
Note:
When the temperature is beyond the normal operating temperature range (-30 °C to + 75 °C),
the RF performance of the module may slightly exceed the 3GPP specifications.
2.3 Hardware Diagram
Figure 2-1 hardware diagram shows the main functions of the MiniPCIe module.
1-way (U)SIM card interface
1-way USB2.0 interface
Sleep&wake up control
Flight mode
