Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 133 of 254
Command
Description
Reference
3GPP TS 27.007
8.1.5 +CLCK, Facility Lock
This command locks, unlocks or interrogates a Modem or a network facility <fac> (any kind of call barring
program).
A password is mandatory for performing locking and unlocking actions, but not for querying. The features
of the Modem that are affected by this are fixed dialing list.
When querying the status of a single call barring program <mode>=2, the <status> for each call type will
be returned.
For <fac>="SC", SIM Card PIN setting and for <fac>="FD", SIM Fixed Dialing memory setting, the
<class> is irrelevant (For more information about <class>, refer to the following table shows the +CLCK
parameters.). For “SC”, the <passwd> is SIM PIN. For “FD”, the <passwd> is SIM PIN2.
Command
Description
Set
[Function]
The Set command performs the specified <mode> action on the specified <fac>.
[Syntax]
AT+CLCK=<fac>,<mode>[,<passwd>[,<classx>]]
[Response/Action]
For <fac> where <class> is irrelevant(SC, FD):
+CLCK=<fac>,2
+CLCK: <status>
For <fac> with several supported <class>es:
+CLCK=<fac>,2
+CLCK: <status>,<class1>
[<CR><LF>
+CLCK: <status>,<class2>
[…]]
OK
Read
N/A
Test
[Function]
