Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 109 of 254
Command
Description
Other values are reserved and will result in an ERROR response to the Set command.
Example
AT+CGSMS=?
CGSMS: (0-3)
OK
AT+CGSMS?
CGSMS: 1
OK
Reference
3GPP TS 27.007
6.1.20 +CMGS, Send SMS to Network
This command sends an SMS from the Modem to the network. The message reference value <mr> is
returned to the Modem upon successful delivery of the message.
Valid <toda> will be any value between 128-255.
The header parameters in TEXT mode will be set according to CSMP settings.
Note:
Any character sent by TE to Modem before Modem has reported a result of AT+CMGS operation,
will abort AT+CMGS command execution. However, if SMS was already sent to network and
sending operation was successful, the result of operation "+CMGS <mr>" will be reported by
Modem.
If after aborting AT+CMGS command execution and before result of operation was reported by Modem, a
second AT+CMGS command is executed, then the result of the second AT+CMGS operation only will be
reported by Modem.
Command
Description
Set
[Function]
The Set command validates the input parameters, sends the SMS to network and
reports the result of the operation to the Modem.
[Syntax]
If text mode (+CMGF=1):
AT+CMGS=<da>[,<toda>]<CR>text is entered<ctrl-Z/ESC>
If PDU mode (+CMGF=0):
AT+CMGS=<length><CR>
