© Pur
eL
ink GmbH
I n n o v a t i o n G e r m a n E n t e r p r i s e s .
K n o w - H o w . Q u a l i t y . D e s i g n .
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: 0049 (0)5971-800 299-0 | E-mail: [email protected] | Internet: www.purelink.de
1
1
Thank you for purchasing FX-P220
The optical DisplayPort pigtail extender with DPCP support extends Dis-
playPort signals up to 300m using single strand multi-mode optic fiber. It
supports display resolutions up to 2560x1600 (WQXGA).
Package Contents
Please make sure all of the following items are included in the package:
1
FX-P220 Transmitter & Receiver
2
+5V DC Power supply x 1pcs
3
User Guide
If any of the above items are missing, please contact your supplier for support.
Note:
Package content may differ if you have placed a special order or placed order from anywhere other than
PureLink GmbH. PureLink GmbH reserves the right to make changes without further notice to a product de
-
scribed herein to improve reliability, design, packaging or function.
Installation
Installation Steps:
1. Connect the Transmitter module to the DisplayPort source device.
2. Connect the Receiver module to the display.
3. Connect a single strand multi-mode SC terminated optic fiber (50/125
µ
m)
from the Transmitter to the Receiver module.
4. Connect the in5V DC power supply into Receiver module.
5. A blue indicator LED will light up after all connections are completed.
Note:
The Transmitter module does not need to be externally powered unless the source device does not
supply enough power through the DVI connector.
LED indicator
DC +5V
Power jack
SC type optical port
FiberX DisplayPort Fiber Extender Pigtail User Guide
FX-P220
