P a g e 3
OVERVIEW
This document describes basic configuration to interconnect Yeastar P-Series and FAG410X. In this
document, we are using FAG4108 and Yeastar P550 as an example. The following methodology can be
used for the FAG4104 as well. This is typically applied to the scenario where users would like to add a
FAG410X not only as a remote extension but also as an external PSTN trunk.
There are two ways to set up the P550 IP PBX with the FAG410X.
•
Method 1
: Configure FAG410X as a SIP Peer Trunk.
•
Method 2
: Register FAG410X on P550 directly as an extension.
Warning:
When using the IVR in P550, please be aware that if "Dial Outbound Routes" option is turned on in IVR
settings and selecting the permitted route, the call into the IVR will be able to dial outbound call using
P550's trunk. Please select proper route for the IVR to control the outbound calls allowed via "Dial
Outbound Routes".
