3 Web Configuration Guide
Figure 3-17
WPS Configuration
2.
Select whether to enable the WPS function. The options include
Enable
and
Disable
.
3.
Select the WPS connection mode as required.
4
Select
Please input PIN code.
, and enter the PIN code of the client end in
the
PIN
text box. Then click
Connect
.
4
Select
Please turn on the button of the equipment
and press down the
WPS
button on the ONT. Then press down the WPS button or the WPS
software key on the client end.
4.
Wait until the connection is completed.
3.3.2
LAN Settings
Configure the management IP address and subnet mask at the LAN side.
1.
Select
Network
in the navigation bar and select
LAN Settings
→
LAN Settings
in the left link bar to open the LAN settings page, as shown in Figure 3-18.
Version: A
39
