- 32 -
· Press Heat key to srop during heating process. The LED light will go off after pressing.
· Fiber protection sleeve adhered to heating plate after shrinking use a cotton swab or a similar soft
tip object to push and remove the sleeve.
· Forgot password
- Please contact the sale agent or the Technical Support manager.
· No arc power change after [Arc calibration]
- An internal factor is calibrated and adjusted for the specific arc power selected.
The displayed arc power in each splice mode does not change.
· Forgot to lad fibers while execute some specified function that fibers are needed. Return key is
invalid. Open the wind protect shield, load prepared fibers in the splicer, and press “Set” to continue
or press “Reset”
· Upgrading Failure
- When users use the USB to upgrade, the splice may not be able to correctly identify the upgrade
file, you need to re-plug the HDMI cable with USB, and retry the upgrade software.
· Check if the upgrade file name and the format are correct.
· SDXX is for SD card Upgrade file, UpdateXX is for USB Upgrade file. The both zip file must be
extracted when you place on The USB.
· If you cannot solve the problem, please contact the Technical Support Manager.
· Other
- If you need more information, Please refer to the video in user’s CD.
