7
InstallatIon
4:
Installation
4.1:
Before installation
!
Connecting the device in a manner inconsistent with this
manual may cause risk to health, life or material damage.
•
Do not
power the device before fully assembling it in the mount-
ing box,
• Connect only in accordance with one of the diagrams,
• Install only in flush mounting boxes compliant with a relevant na-
tional safety standards and with depth no less than 40mm,
•
Do not
connect devices which are not compliant with the specifi-
cation or relevant safety standards,
•
Do not
connect heating devices,
•
Do not
connect SELV or PELV circuits.
• Make sure you have all required parts when installing with covers
other than FIBARO (see “Parts compatibility” on page 36).
Device parts:
1
2
3
4
1 – switch button, 2 – cover plate, 3 – unit (device), 4 – mounting
frame
Notes for diagrams:
N
- terminal for neutral wire
Q1
– 1st output terminal motor
Q2
– 2nd output terminal motor
L
– terminal for live wire
G
– groove used to measure wire length
