Page 1: ......
Page 2: ...et procedure make sure the battery works and is in place press and hold the B button for few seconds until the LED turns white after short sound signal release the B button wait until the visual indicator turns yellow again press the B button briefly Successful reset will be confirmed with the LED changing color to red STEP 3 Excluding and including sensor from Z Wave Network Before every inclusio...
Page 3: ...e the battery is in place press and hold B button until the visual indicator glows white and short alarm sounds After 3 seconds from the first beep smoke chamber operation will be checked Triggering fire alarm and beep mean positive result and should occur within 10 seconds Trouble signal or no fire alarm mean that the sensor is malfunctioning STEP 5 Contact with service If only one of steps above...
